Follow Us:

Mobile & Baldwin County, Alabama

Follow Us:

Mobile & Baldwin County, Alabama

Sheet Metal Fabrication in Fairhope
and the Eastern Shore

Daniels Sheet Metal is your source for professional sheet metal fabrication in Fairhope, AL.

Daniels Sheet Metal fabricates custom copper, aluminum and stainless steel for homes and businesses across Baldwin County’s Eastern Shore, from Fairhope and Point Clear to Daphne, Spanish Fort and Magnolia Springs. We build in our Mobile shop and install across the Eastern Shore, so you get a piece fabricated to your house instead of a stock part that nearly fits. We’ve been doing this since 1974.

Metal That Holds Up on Mobile Bay

Waterfront and bluff properties on the Eastern Shore see more salt, more humidity and more direct storm exposure than most of Mobile County. Those conditions affect our recommendations.

Salt air is hard on the wrong metal. Bare steel and cheaper coated metals tend to fail early near the water. Copper, properly coated aluminum and stainless steel are the materials that last. If a property sits right on the bay or the bluff, we’ll tell you which of the three makes sense and which fasteners to pair with it.

Wind matters too. On exposed lots, how a piece is mounted can be as important as the metal itself. Gutters, awnings and chimney caps all take wind load, so we use quality mounting and fasteners that are designed to stand up to the challenge.

Fitting Metal to Eastern Shore Homes

The Eastern Shore has a lot of older homes, cottages and downtown storefronts where the metalwork is a key part of how the building looks. Half-round copper gutters, copper dormers and bay window roofs, and awnings over storefronts all fit these buildings in a way off-the-shelf parts don’t. We fabricate to the profile and dimensions of the building, and we can often match an existing detail from a photo or a sample.

Copper, Aluminum or Stainless Near the Bay

Copper. Copper is the best-looking and longest-lasting option for visible work.  Near salt water, it weathers faster—but that can actually be a goo thing, depending on the look you want. The green-blue patina that takes years to build inland tends to show up sooner on the bay. The patina is protective, and many owners like the look, but it’s worth deciding what you want before the metal goes up. We’ll tell you what to expect.

Aluminum. Properly coated aluminum is a good fit for color-matched work such as gutters, awnings and patio covers. The coating isn’t just decorative—it’s also protective.  Our experienced team gets it right at installation to minimize weak points like scratches and exposed cut edges.

Stainless steel. Stainless doesn’t need a coating and is the right call for vent hoods, chimney caps and other pieces that take heat or constant exposure. Near salt water the grade matters, since some grades are better suited to marine air than others. Ask us what makes sense for your location.

What We Build for Eastern Shore Customers


If you’re looking for gutters specifically, see gutters in Daphne or our copper gutters page.

Keeping Metalwork in Good Shape Near the Water

Quality metal doesn’t ask for much, but a few good habits can help it last in coastal locations. Rinse it with fresh water now and then to wash off salt buildup, especially on pieces that face the bay. Keep gutters clear of oak, pine and leaf debris, because wet debris sitting in a gutter is hard on any metal. And when you add to an existing system, keep copper separate from aluminum and galvanized steel, since runoff from copper can corrode the other metals. If you’re not sure what you have, send us a photo.

How a Custom Job Works

Custom doesn’t have to mean complicated or slow.  Our team of sheet metal fabrication experts will guide you through a simple, streamlined process that gives you the information you need to make your decision.  Then we bring your vision to life with quality components fabricated to your exact specifications. 

Here’s what you can expect:

  1. Tell us what you need. Call or send photos, measurements and the address. For an older home, a photo of the existing piece and a few measurements usually get things started.
  2. We confirm the details and give you a free estimate.
  3. We fabricate it in our Mobile shop.
  4. We install it, or provide it ready for your crew to install.

Working With Eastern Shore Builders and Contractors

If you build or renovate on the Eastern Shore, we fabricate to your measurements and make the piece ready to install, so your crew isn’t cutting and bending on site.

Frequently Asked Questions

Do you serve Fairhope from Mobile?

Yes. Our shop is on Halls Mill Road in Mobile, and we fabricate and install across the Eastern Shore, including Fairhope, Point Clear, Magnolia Springs, Daphne and Spanish Fort.

Copper is the longest-lasting and the best-looking option for visible work. Properly coated aluminum is the practical choice when you need to match a color. Stainless steel suits vent hoods and chimney caps. We can help you understand the pros and cons for your specific project and budget.

Often, yes. Send us photos and measurements, or we can look at it in person.

Yes, that is often the case. Salt air speeds up the patina, so copper near the water tends to darken and turn green-blue sooner than copper inland. The patina protects the metal, and many owners like the look. Tell us which you prefer and we’ll talk through what to expect.

We’d advise against connecting the two directly. Runoff from copper can corrode aluminum and galvanized steel downstream. We can look at what’s on the house and tell you the safest way to add or replace pieces.

Yes. We build awnings, gutters, flashing and custom pieces for businesses as well as homes.

Both. We install most of what we make, and we also fabricate for contractors to install themselves.

Call 251-666-0961 or send a message through our contact form. Estimates are free.

Call Daniels Sheet Metal at 251-666-0961 for a free estimate on custom metalwork anywhere on the Eastern Shore.